Toro Sand Pro® 2040Z

The Sand Pro® 2040Z mechanical rake is unlike anything else in the marketplace; a zero-turn mechanical groomer delivering unmatched maneuverability and productivity. This unique machine is a daily bunker rake that will reduce labor costs for both mechanical and hand raking of bunkers and infields. A brand new “flex” raking system with the patented “lift in turn” feature enables an operator to turn tightly in bunkers without leaving unraked teardrops or tire marks.

ENGINE	Kawasaki 2 cylinder, air cooled, gasoline engine; Gross HP 13.6 HP (10.1 kW), Governed HP 12.2 HP (9.1 kW) @ 2400 rpm; Max torque 27.3 ft-lbs (37.0 Nm) @1800 rpm; Displacement 36.7 cu-in. (603 cc); Oil capacity w/filter 1.7 qts. w/filter (1.5 w/o filter); Oil Filter External, spin-on
AIR CLEANER SYSTEM	Heavy duty single stage cyclonic air filter with replacement element
FUEL CAPACITY	4.5 gals (17 liters) of unleaded gas (maximum 10% ethanol)
TRACTION DRIVE	Belt driven independent infinitely variable unitized transmission, with automatic tensioning system
HYDRAULIC OIL	Factory fill Mobil fluid 424 tractor transmission fluid; Left hand transmission section: 3.1 qt. (3.25 liters); Right hand transmission section: 3.55 qt. (3.75 liters)
GROUND SPEED	Forward 0-12 mph (0-19.3 km/h), Reverse 0-4 mph (0-6.4 km/h). See Speed Limiter Kits below for additional information.
TIRES/WHEELS	Drive Wheels 25×12- 9, 3 ply rating pneumatic tubeless demountable with a Turf Tamer (knobby) tread. Front Wheel 16×7.5-8 4 ply rating pneumatic tubeless demountable with turf traction tread. Recommended tire pressure: 7 psi all tires
MAIN FRAME	Rectangular structured steel tube and high strength steel plate welded construction.
BRAKES	Twin levers with dynamic braking through hydrostatic transmission. Hand actuated parking brake lever that controls two integral wet disc brakes contained within transmission.
STEERING	Power steering, controlled through two independent control sticks with integrated dampeners. Min. turning radius: 0 in (0 cm)
CONTROLS/GUAGES	Ignition: Off/Run/Start; Throttle: Low – High Idle; Choke: Open /Closes choke plate; Parking Brake: Off – On LCD logic cluster includes hour meter and safety interlocks for operator presence, neutral and parking brake.
REAR ATTACHMENT HYDRAULIC LIFT	Raise/Lower switch mounted at end of right handle.
SEAT	High back cushion vinyl seat with drain hole, integrated armrest and retractable seat belt; adjustment is 4 inches fore and aft.
ROPS	Two post fixed ROPS, certified per ISO/DIS 21299.2 specifications
STORAGE	Built-in cup holder, rake holder and personal storage reached from seat.
ELECTRICAL FEATURES	12-volt system, 20-amp alternator at 3,600 rpm. Battery Voltage is displayed when key switch is moved from off to run (Low Battery LED will illuminate if key voltage is less than 12.3V in run position)
SOOUND LEVEL	88 dBA (Operator Ear)
LENGTH	89″
WIDTH	84″
OVERALL HEIGHT	73″
WEIGHT	417 kg
GROUND CLEARANCE	5.5″ (14 cm) at machine centerline 24″ (61 cm) tire
TIE DOWNS	Four loops, one located on each corner of the machine.
WARRANTY	2-year limited warranty. Refer to the Operator’s Manual for further details
SAFETY CERTIFICATIONS	Certified to meet ANSI specification B71.4 – 2012 standards when equipped with weight kits supplied with attachments. Certified to meet ISO/DIS 21299 for ROPS. Engine meets all applicable emission standards per the manufacturer. Certified to meet C-Tick 2004/108/EC/(EMC) and the CE Machinery Directive.