Toro Sand Pro® 5040

The Sand Pro® 5040 is the definition of versatility and function. The patented Quick Attach System™ (QAS) for front, mid and rear attachments allows for under-a-minute attachment changes. With a powerful 13.4kW engine and hydraulic power steering, be more productive with 17 attachments, including the Flex Blade which raises and lowers hydraulically. Each attachment was specifically designed to take the operator influence out of the equation for high performance and a consistent surface finish.

ENGINE	Vanguard®, V-twin cylinder, 4-cycle, OHV, air-cooled, gas engine with cast iron sleeves. 18 hp (13.4 kW) at 3600 rpm. Displacement: 34.8 cu. in. (570 cc). Oil capacity: 1.75 quart (1.8 liter). Electronic ignition. Full pressure lubrication, oil filter. Base mounted engine and pump with 4 isolation mounts.
AIR CLEANER SYSTEM	Remote-mounted 3-phase Donaldson® air cleaner.
FUEL CAPACITY	5.0 gallon (18.9 liter) of unleaded gasoline
TRACTION DRIVE	Direct driven hydrostatic variable displacement piston pump to 3 hydraulic motors for 3WD. Large, front mounted hydraulic cooler and fan. Foot pedal control, forward/reverse. Patented Series/Parallel hydraulic traction system keeps three wheels working together, virtually eliminates spin-outs.
GROUND SPEED	Infinitely variable 0-10 mph (16 km/h) forward; 4.3 mph (6.9 km/h) reverse
TIRES/WHEELS	Three, 22 x 11.00-8 pneumatic tubeless tires on demountable, interchangeable wheels. Tire pressure: 8-10 psi (55.2-69 kPa).
MAIN FRAME	Tricycle vehicle with welded rectangular tubular steel frame construction. Rear engine placement.
BRAKES	Dynamic braking through the hydrostatic transmission and hand actuated brake lever
STEERING	Hydraulic power steering. 15″ (38 cm) diameter steering wheel.
CONTROLS/GUAGES	Hand-operated choke, throttle, and hydraulic control for raising/lowering with float. Foot pedal controls traction forward/reverse speed. Front and rear hydraulic lift and lower controls. Gauges: hour meter.
SEAT	High-back cushion seat w/drain hole. 4″ (10.2 cm) front-back adjustment w/additional 1.75″ (4.4 cm) mounting adjustment. (Arm rests optional)
LENGTH	67.5″
WIDTH	58″
OVERALL HEIGHT	45.25″
WEIGHT	421.8 kg
GROUND CLEARANCE	6.0″
WARRANTY	Two-year limited warranty. Refer to the Operator’s Manual for further details. Briggs & Stratton® provides a two-year commercial engine warranty and a lifetime Magnetron® warranty