Toro Greensmaster® 3250-D

Toro Greens Mowers For Sale

The Greensmaster 3250-D is distinguished for its field-proven performance and exceptional quality of cut.

Key Features

Contact

Semco

Description

The Greensmaster 3250-D is distinguished for its field-proven performance and exceptional quality of cut. Equipped with patented DPA cutting units for a superior cut and minimal maintenance, convenient controls for easy operation, and ample power to handle any application–it’s no wonder this classic model has been trusted over the years to deliver the performance golf courses demand with a putting surface that exceeds expectations.

ENGINE	Kubota® 902 tier 4i, 3-cylinder liquid-cooled diesel engine. 55.0 cu. in. (902 cc). Full pressure lubrication, oil filter. 24.8 hp (18.5 kW) @ 3600 rpm. Engine governed to 2760 rpm high idle, 1500 rpm low idle (no load).
FUEL CAPACITY	6 gallons (22.7 liters). Biodiesel-Ready for use up to B-20 (20% biodiesel and 80% petroleum blend)
TRACTION DRIVE	Hydraulic piston pump, closed loop system. 2WD Parallel Hydrostatic or optional 3WD Series Parallel piston pump closed loop system. Foot pedal forward and reverse; infinitely variable.
GROUND SPEED	Forward-mowing speed is variable from 2-5 mph (3.2-8 km/h), adjusted by stop on pedal mechanism. Mow speed setting does not affect transport speed. Maximum Greensmaster 3250-D transport speed is 10 mph (16.1 km/h), may be reduced by adjusting stop in footrest pan without affecting mow speeds.
TURF COMPACTION	8-12 psi (.55-.83 bar) average at recommended minimum tire pressures, with a 200 lb.. operator, and cutting units down.
STEERING	Power steering. No-tool quick adjust steering arm position, with arm motion allowing a wide range of operator sizes. Steering cylinder has through shaft design for precise straight line tracking.
CONTROLS/GAUGES	Raise/lower-mow lever. Functional control lever (neutral, mow, transport). Foot operated traction drive and brakes. Hour meter and warning light cluster. Hand operated choke, throttle. Mechanical engine speed control.
ELECTRICAL FEATURES	Maintenance-free 12-volt battery with 530 minimum cold cranking amps at 0° F. 40 amp alternator, circuit fused at 40 amps. Ignition switch/key. Seat switch. High temperature engine kill override switch. Harness terminals, fuse slot, and console switch location available for optional lights installation.7
SOUND LEVEL	84 dBA at operator ear under normal conditions
OVERALL DIMENSIONS	Width of Cut: 59.0″ (150 cm) Overall Height: 77.5″ (197 cm) Wheel Tread: 50.5″ (128 cm) Net Weight (no fuel, no operator): 1,216 lbs. (552 kg) Wheel Base: 48.6″ (123 cm) Reel Speed: Approx.1,950 rpm @ 2760 rpm (Adjustable) Overall Length (w/baskets): 93.9″ (238 cm) Overall Width: 68.0″ (173 cm
TIRES	Three 19 x 10.5-8, 2 ply pneumatic tubeless demountable and interchangeable. Smooth tread (approx. 1290 rev/mile). 8-12 psi front; 8-15 psi rear
LEAK DETECTION	Turf Guardian™ optional.
BRAKES	Foot activated 6″ (15.2 cm) drum type mechanical with rack and pawl lock for parking brake engagement
SEAT	Contour seat with high backrest. 7″ (17.8 cm) fore/aft slider adjustment with two mounting positions, allowing 9″ (22.8 cm) total seat travel. Operator manual tube mounted on the seat back for easy access.
ROPS	Roll over protection system standard.
BACKLAPPING	Standard equipment.
CERTIFICATION	Certified to meet ANSI specification B71.4-2012 and European CE standards with appropriate kits installed.
WARRANTY	Two-year limited warranty. Refer to the Operator’s Manual for further details.