Toro Greensmaster® 3150-Q
Toro Greens Mowers For Sale
- Engine: Briggs & Stratton® 18 hp (13.4 kW) @3600 rpm
- Height: 74.5" (189 cm)
- Weight: 1,087 lbs. (493 kg)
Semco
ENGINE | 18 hp (13.4 kW) @3600 rpm, Briggs & Stratton® air-cooled gasoline engine, governed to 2850 rpm high idle, 1650 rpm low idle. |
FUEL CAPACITY | 7 gallon (26.5 liter) capacity; unleaded gasoline |
TRACTION DRIVE | Hydraulic piston pump, closed loop system. 2WD Parallel Hydrostatic or optional 3WD Series Parallel piston pump closed loop system. Foot pedal forward and reverse; infinitely variable. |
GROUND SPEED | Forward-mowing speed is variable from 2-5 mph (3.2-8 km/h), adjusted by stop on pedal mechanism. Mow speed setting does not affect transport speed. Maximum Greensmaster 3150-Q transport speed is 10 mph (16.1 km/h), may be reduced by adjusting stop in footrest pan without affecting mow speeds. |
TURF COMPACTION | 8-12 psi (.55-.83 bar) (dependent on tire pressure) with operator and cutting units down. |
STEERING | Power steering. Adjustable steering wheel tilt and a 5-position steering arm tilt. |
CONTROLS/GAUGES | Raise/lower-mow lever (joystick). Functional control lever (neutral, mow, transport). Foot operated traction drive and brakes. Hour meter. Hand operated throttle and choke. Mechanical engine speed control. |
ELECTRICAL FEATURES | 12-volt lead acid, group size U1, with 300 minimum cold cranking amps at 0° F. 16 amp alternator. Ignition switch/key. Seat switch. Harness terminals and fuse slot available for optional lights installation. |
SOUND LEVEL | 82 dB(A) at operator’s ear under normal conditions. |
OVERALL DIMENSIONS |
Wheel Tread: 49.5″ (149.9 cm) Wheel Base: 47″ (119 cm) Length: 90″ (229 cm) Width: 69.7″ (177 cm) w/reels Height: 74.5″ (189 cm) Weight: 1,087 lbs. (493 kg). |
TIRES/WHEELS/PRESSURE |
Three 18 x 10.5-8, 4-ply pneumatic tubeless demountable and interchangeable with smooth tread. 8-12 psi front; 8-15 psi rear. Optional Traction Tire (4-ply): P/N 119-3516. |
LEAK DETECTION |
Equipped with Turf Guardian™ leak detection system. |
REEL SPEED |
Approximately 1975 RPM at 2850 engine RPM. Adjustable. |
BRAKES |
Foot activated with two 6″ (15.2 cm) drum type brakes mounted on the front wheel motors. |
SEAT |
Contour seat with high backrest. 7″ (17.8 cm) fore/aft slider adjustment with two mounting positions, allowing 9″ (22.8 cm) total seat travel. Operator manual tube mounted on the seat back for easy access. |
ROPS |
Roll Over Protection System standard. |
WIDTH OF CUT |
59″ (150 cm) |
BACKLAPPING |
Standard equipment |
CUTTING UNIT SUSPENSION |
Cutting units are completely free-floating, each attaching to the tractor by direct pull links and lifted by a centered lift arm. Baskets are supported by carrier frames that are ground following. Cutting unit floatation is unaffected by basket content. Grass baskets are all interchangeable and accessible from the front of the machine. |
IMPLEMENT DRIVE |
Single gear pump, mono valve block, series reel drive to 3 motors |
HYDRAULIC OIL |
7.5 gallon (28.4 liter) tank with internal baffle. 1.0 gallon (3.8 liter) auxiliary tank. |
CERTIFICATION |
Certified to meet ANSI specification B71.4-2012 and European CE standards with appropriate kits installed. |
WARRANTY |
Two-year limited warranty. Refer to the Operator’s Manual for further details. |