Toro Groundsmaster® 1200

The Groundsmaster® 1200 delivers an unparalleled combination of productivity, durability and superior cut. It features a 3.7 m width of cut and can mow up to 3.53 hectares/h at 9.7 km/h per hour. Remaining true to Groundsmaster’s unmatched reputation of durability, the 1200 was designed for years of reliable mowing. Its spindles are the same as Toro’s large rotaries and capable of withstanding the roughest conditions. The bi-directional impact resistant system provides additional protection to the wing decks. The Groundsmaster® 1200’s independently articulating decks hug undulations for an exceptional finish. Combine this with the dual roller design, the Groundsmaster 1200 delivers a high-quality cut and rich turf striping in most conditions. Productivity, durability and exceptional cut. That’s what makes the 1200 the only pull behind worthy of being a Groundsmaster®.

WIDTH OF CUT	Overall: 12 feet (365 cm), Individual deck: 54″ (137 cm), Overlap: 9″ (23 cm)
MOWING RATE	Mows up to 8.73 acres/h (3.53 hectares/h) at 6 mph (9.7 km/h), assumes no overlap or stops
CONSTRUCTION	10-gauge high-strength steel constructed deck with 7-gauge bolt-in reinforcements. 7-gauge welded steel side skids with 5″ (12.7 cm) diameter steel rollers.
DECK DRIVE	PTO drive-shaft drives 4-way gearbox, secondary drive-shafts drive individual deck gearboxes, spindles belt driven with spring tensioner pulley. Main drive-shaft fits standard 1-3/8″ (3.5 cm), 6-spline tractor PTO and contains 80 deg CV joint. Deck gearbox contains over-running clutch.
HEIGHT OF CUT	0.5″ to 4.0″ (1.3 cm to 10.2 cm) infinitely variable
SPINDLES	1.25″ (3.17 cm) diameter spindle shafts, 9″ (22.9 cm) diameter conical ductile iron housing and two greasable tapered roller bearings. Driven counter-clockwise when viewed from the top.
BLADES	9 blades, 19″ (48.3 cm) long, 2.5″ (6.4 cm) wide, 0.25″ (6.4 mm) thick
GROUND FOLLOWING	9 anti-scalp cups, one on each blade, two anti-scalp/striping rollers on each deck. On each deck: two 5″ (12.7 cm) diameter roller
WING PROTECTION	Bi-directional, impact absorption damper on each wing deck
OVERALL DIMENSIONS	Transport Height: 75.75″ (192.4 cm) Transport Length: 145.5″ (369.6 cm) (Hitch fully extended) Width: (decks down):149.8″ (380.5 cm) Transport Width: 86″ (218.4 cm) at 1/2″ (1.27 cm) HOC
POWER REQUIREMENTS	Minimum 35 HP (26 kW) at the PTO, 540 RPM
BLADE TIP SPEED	15,000 ± 300 ft/min (4572 ± 91.4 m/min) at 540 PTO RPM
TYRES	20 X 10 – 10 6-ply K500 turf tread
WEIGHTS	Total weight = 2,984 lbs (1354 kg), Tongue Weight in Transport = 691 lbs (313 kg)
ACCESSORIES	Road light kit, Tow chain kit, Slow moving vehicle sign, Fender kit, Nylon blade cover kit
CUTTING UNIT ACCESSORIES	Roller scraper kit, MVP blade pack standard, MVP blade pack high lift, MVP blade pack atomic
WARRANTY	Two-year limited warranty. Refer to the Operator’s Manual for further details.
CERTIFICATION	Complies with American National Standards Institute (ANSI B71.4-2012)