Toro Groundsmaster® 4300-D

The Groundsmaster® 4300-D has a lightweight footprint and CrossTrax® 4-wheel drive for superior hill-climbing. Each of its five Contour™ Plus cutting units closely follows contours for an even cut on undulating terrain. With an average 2.67 hectares an hour of mowing capacity, Smart Power® with economy mode, switch-activated cruise control, electronically controlled hydrostatic pump and automatic, spring-applied parking brake, the Toro 4300-D Groundsmaster delivers unsurpassed performance and value.

ENGINE	Yanmar® 3-cylinder, 88.5 ft.-lbs. of torque, liquid-cooled, turbo-charged diesel, 43.4 hp (32.4 kW) 91.4 cu. in. (1.5 liter) displacement. 5.5 quart (4.7 liter) oil capacity. Tier 4 Final, Stage V.
AIR CLEANER	Dry, replaceable primary and optional safety element.
RADIATOR	Rear-mount, cross flow, 7-row, 6.3 fins per inch, 5.5 quart (5.2 liter) capacity
FUEL CAPACITY	13.5 gallons (51.1 liters) diesel fuel. Biodiesel-ready for use up to B20 (20% biodiesel 80% diesel blend).
TRACTION DRIVE	Electronically controlled hydrostatic pump with individual wheel motors. CrossTrax® All-Wheel Drive system standard, which transfers power from the front wheels to the opposite rear wheels via independent rear wheel motors.
HYDRAULICS/COOLING	14 gallon (53 liter) capacity with two remote spin-on filters; main system, and traction charge, Oil cooler is a double row single pass that tilts out for cleaning.
DIAGNOSTICS	Diagnostics pressure test ports: forward and reverse traction, deck circuit 1 & 2, charge, 4WD, and lift.
GROUND SPEED	0-10 mph (0-16 km/hr) forward transport; 0-8 mph (0-12.8 km/hr) mow, factory default is 7 mph (11.3 km/hr); 0-5 mph (0-8 km/hr) reverse transport; 0-4 mph (0-6.4 km/hr) reverse mow.
TIRES	Front: 26.5 x 14-12, 6-ply turf tread. Rear: 20 x 12-10, 6-ply turf tread.
MAIN FRAME	All welded formed-steel frame with integral tie-down anchors
BRAKES	Dynamic braking through hydrostatic traction drive. Parking brake is activated when engine is turned off, when operator leaves seat, or by rocker switch
SEAT	Mechanical suspension seat standard with pivoting LH armrest, pivoting RH control arm and retractable seat belt, Air-Ride seat suspension optional
STEERING	Rear wheel, power steering with an independent hydraulic pump circuit
INSTRUMENTATION	InfoCenter™: Onboard LCD display shows gauges, alerts/faults, service reminders, electrical system diagnostics. Indicates fuel level, coolant temp, low oil pressure, alternator, engine hours, engine rpm, voltage, counterbalance settings, glow indicator, lift/lower indicator
CONTROLS	Single foot-operated traction pedal. Hand-operated key ignition switch, cutting unit raise/lower switch, cutting unit engage switch, parking brake switch, cruise control switch, and headlight switch all positioned on right hand pivoting control console.
ELECTRICAL	12-volt battery with 540 cold cranking amps, 55 amp alternator. Overload protection with automotive-type fuses
INTERLOCKS	Prevents engine from starting unless traction pedal is in neutral and deck is disengaged. If operator leaves seat with deck engaged, decks stop. If operator leaves the seat with the unit out of neutral, engine stops. Engine stops if parking brake engaged and traction pedal not in neutral.
OPERATOR AREA	Beverage holder, radio holder / mobile phone holder, 12-volt power outlet, open compartment for tools, jackets, golf balls, etc. under control arm.
WORK LIGHTS	Standard, LED, 650 lumens
ROLL-OVER PROTECTION	2-post standard.
DIMENSIONS W/ CUTTING UNITS & WEIGH	Overall length w/decks down: 126” (320 cm) Traction Unit Weight: 3,205 lbs (1454 kg) – with full fluids and 5 cutting units. Overall width: 96.3” (245 cm) (outside of decks) Cutting Unit Weight: 140 lbs (64 kg) – single cutting unit assembly only. Overall transport width: 88.3” (224 cm) (outside of front tires) Height w/2-post ROPS: 86” (215 cm) Wheelbase: 60” (152.4 cm) Track Width, front/rear: 88.3” (224 cm)/54” (137 cm) Ground clearance: 5” (12.7 cm)
SAFETY	Complies with American National Standards Institute (ANSI B71.4) and applicable ISO EN 5395 (CE) standards (machine directive 89/392, 91/368, 93/44, 84/538, 89/336) requirements.
WARRANTY	Two-year limited.